- Information
- Products
- Pond Construction
- Koi Info
- Pond Info
- Portfolio
- Portfolio Introduction
- Portfolio I
- Portfolio II
- Portfolio III
- Portfolio IV
- Portfolio V
- Portfolio VI
- Portfolio VII
- Porfolio VIII
- Porfolio IX
- Portfolio X
- Porfolio XI
- Porfolio XII
- Portfolio XIII
- Porfolio XIV
- Portfolio XV
- Portfolio XVI
- Portfolio XVII
- Portfolio XVIII
- Portfolio XIX
- Portfolio XX
- Portfolio XXI
- Interest
Portfolio ix
kevin's Pond, markham, 2005
Background
This pond was another rebuild. We made the pond deeper and added a bottom drain and external filtration. The rock work was all redone with new stone, and a new stream/waterfall was installed
A concrete collar actually discovered when we pulled up the liner - it appears someone knew what they were doing when they originally put the pond in
Equipment
Nitritech Filter System | 4 inch bottom drain
This pond was another rebuild. We made the pond deeper and added a bottom drain and external filtration. The rock work was all redone with new stone, and a new stream/waterfall was installed
A concrete collar actually discovered when we pulled up the liner - it appears someone knew what they were doing when they originally put the pond in
Equipment
Nitritech Filter System | 4 inch bottom drain
irawan's Pond, maple, 2006
Background
This is the largest project Clarke Koi Ponds has undertaken to date. The 2 ponds are connected via a waterfall with the overall measurement being 70 feet. The pond is about 14 feet wide and just over 6 feet in depth
This project is a rebuild and it took a substantial amount of time just to rip out the existing pond. The equipment catalogue is extensive. 3 bottom drains, 7 Nitritech vetex chambers, a large rotating media filter, 4 pumps boxes with sequence and dolphin pumps, 2 air compressors, 4 pond jets, an Aquadyne 4.4 bead filter and more
Equipment
3 x Sequence 1/2 h.p. | 2 x Dolphin 2100 | 2 x Alita Air Compressor | 7 x Nitritech Vetex Chambers | 4 x Jets | 6 Foot Rotating Media Filter | Savio Skimmer Related Link Savio Skimmer Review
This is the largest project Clarke Koi Ponds has undertaken to date. The 2 ponds are connected via a waterfall with the overall measurement being 70 feet. The pond is about 14 feet wide and just over 6 feet in depth
This project is a rebuild and it took a substantial amount of time just to rip out the existing pond. The equipment catalogue is extensive. 3 bottom drains, 7 Nitritech vetex chambers, a large rotating media filter, 4 pumps boxes with sequence and dolphin pumps, 2 air compressors, 4 pond jets, an Aquadyne 4.4 bead filter and more
Equipment
3 x Sequence 1/2 h.p. | 2 x Dolphin 2100 | 2 x Alita Air Compressor | 7 x Nitritech Vetex Chambers | 4 x Jets | 6 Foot Rotating Media Filter | Savio Skimmer Related Link Savio Skimmer Review
barry's Pond, scarborough, 2006
Background
This pond was started in the Fall of 2005 and completed in 2006. Another rebuild, the pond was made over 2 feet deeper and also wider as the concrete stairs on the back side of the pond had to be removed. This was a very laborious task as the concrete was thick and contained rebar
The pond is at least double the volume of what it was and now has a bottom drain, skimmer and external filter system. The pond measure about 12 foot square and is over 7 feet deep
Equipment
1 x 4" bottom drain | Dolphin 3000 | Dolphin 2100 | Savio Mini Skimmer | Nitritech Junior Vortex | Custom Built Rotating Media Filter
This pond was started in the Fall of 2005 and completed in 2006. Another rebuild, the pond was made over 2 feet deeper and also wider as the concrete stairs on the back side of the pond had to be removed. This was a very laborious task as the concrete was thick and contained rebar
The pond is at least double the volume of what it was and now has a bottom drain, skimmer and external filter system. The pond measure about 12 foot square and is over 7 feet deep
Equipment
1 x 4" bottom drain | Dolphin 3000 | Dolphin 2100 | Savio Mini Skimmer | Nitritech Junior Vortex | Custom Built Rotating Media Filter