|
 |
 |
 |
 |
Background
This pond was another rebuild. We made the pond deeper and added a bottom drain and external filtration. The rock work was all redone with new stone, and a new stream/waterfall was installed. A concrete collar actually discovered when we pulled up the liner - it appears someone knew what they were doing when they originally put the pond in
Equipment
Nitritech Filter System | 4 inch bottom drain
|
|
|
 |
 |
 |
 |
Background
This is the largest project Clarke Koi Ponds has undertaken to date. The 2 ponds are connected via a waterfall with the overall measurement being 70 feet. The pond is about 14 feet wide and just over 6 feet in depth. This project is a rebuild and it took a substantial amount of time just to rip out the existing pond. The equipment catalogue is extensive. 3 bottom drains, 7 Nitritech vetex chambers, a large rotating media filter, 4 pumps boxes with sequence and dolphin pumps, 2 air compressors, 4 pond jets, an Aquadyne 4.4 bead filter and more
Equipment
3 x Sequence 1/2 h.p. | 2 x Dolphin 2100 | 2 x Alita Air Compressor | 7 x Nitritech Vetex Chambers | 4 x Jets | 6 Foot Rotating Media Filter | Savio Skimmer
Related Link
Savio Skimmer Review |
|
|
 |
 |
 |
 |
Background
This pond was started in the Fall of 2005 and completed in 2006. Another rebuild, the pond was made over 2 feet deeper and also wider as the concrete stairs on the back side of the pond had to be removed. This was a very laborious task as the concrete was thick and contained rebar
The pond is at least double the volume of what it was and now has a bottom drain, skimmer and external filter system. The pond measure about 12 foot square and is over 7 feet deep
Equipment
1 x 4" bottom drain | Dolphin 3000 | Dolphin 2100 | Savio Mini Skimmer | Nitritech Junior Vortex | Custom Built Rotating Media Filter
|
|
